You are here:HOME >> Products >> ENERGY

Products

Products

News

ENERGY

LADDER CABLE TRAY MAKING MACHINE

This production line can produce ladder-side bridges with four specifications of 100, 150, 200, and 250. The specifications of the ladder-side bridges produced can be adjusted freely by replacing the spacer sleeve of the roll.


  • Channel ladder cable tray making machine DESCRIPTION:

    This production line can produce ladder-side bridges with four specifications of 100, 150, 200, and 250. The specifications of the ladder-side bridges produced can be adjusted freely by replacing the spacer sleeve of the roll.

    cable tray making machine

     

    This production line is a special equipment for the production of one-time forming the cable trays, with servo feeding and online punching; the main machine is a combination and adjustable form, without changing the rolls, one set of rolls can complete the rolling of any specifications of the bridge profiles.

     

    ladder cable tray making machine

     


    Machine Features:

    1, According to production needs, a variety of cable trays with a strip width of 200-1050mm can be rolled.

      2, Production speed during online punching: 4-6m/min.

      3. Continuous molding speed of molding equipment: 10-15m/min.

      4. Board material thickness: 0.8-2.0mm.

      5. Material requirements: Q235, galvanized steel strip, etc.

      6, The production line is divided into automatic and manual operation modes, which can realize linkage and segmented operation.

     
    ladder cable tray making machine

     

    Technical Specification of cable tray making machine:

     

    Cable tray Width

    the width of the plate is 100mm-800mm, the width is automatically adjusted by the motor guide rail, and the motor is adjusted to 0.75kw

    Pressing thickness:

    1.5-3mm, height: 100-200mm

     

    Working line speed:

    0-12m/min.

    Number of rollers Sets:

    20 Sets

    Roller materials:

    high-quality Gcr15 bearing steel, forged, quenched and tempered, and the surface is plated with hard chromium.

    Axle material:

    45# steel quenched and tempered, shaft diameter 90mm.

    Main motor power:

    22kw cycloid reducer, 1 set

    Transmission mode:

    gearbox universal joint transmission

    Number of universal joints:

    Model 160, 13 in total

    Cut off:

    hydraulically fixed.

    Motor power of hydraulic station:

    7.5KW external installation

    Electronic control system:

    The whole machine adopts PLC frequency conversion control, the touch screen displays the value, and the Omron rotary encoder calculates the length.

    Voltage:

    380V, 5OHZ, 3 phase

    Equipment size:

    about 16.8m*2.5m*1.2m

    Machine Power

    ~ 35 KW

     

     cable tray making machine

    Structure of Cable ladder  tray making machine

    Feeding → Feeding calibration import → Leveling → Punching → Roll forming → Computer cut to length → Finished product support

     

    Device Configuration

    1. 10T hydraulic discharge rack, 1 towing trolley, 1 pair of flat scissors (front shear), 8 sets of beading sticks, 4 sets of punching dies, 1 set of forming host, 1 gear box, 1 electrical control system Sets, 2 1.5m finished product discharge stations

    2. 1 set of PLC control box

    3. 1 set of hydraulic pump station

    4. Discharge table two





  • Or use the form below to contact us:

    *

    *

    *

    *

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales